YB-A16B,A25B,A36B Single stage vane pump

Welcome to "Saar Hydraulic", your one-stop hydraulics resource.

Brife introduction:

YB-A Series pump is a single-stage vane pump, used to supply hydraulic system pressure oil, the oil pump is rated pressure 7 mpa, rotational speed 1500 r/min. Its small volume, large flow, small pressure fluctuation, is applicable to general machine tool main drive and control for other hydraulic transmission oil. This pump is mainly used in municipal engineering, such as roller, etc

YB-A16B,A25B,A36B Single-stage Vane Pump

Specification

vane pumps YB-A16B,A25B,A36B Single stage vane pump
Double vane pump works: it consists of stator, rotor, blade and oil pan and other components. The inner wall of the stator is approximately elliptical. The blade is mounted in the radial groove of the rotor and slides along the groove, and the rotor is mounted concentrically with the stator. When the rotor is rotated, the blade is pressed against the inner surface of the stator under the action of centrifugal force, and is forced to reciprocate in the rotor tank with the change of the inner surface curve of the stator, and the sealing working chamber between adjacent two blades is enlarged and shrunk Variety. When the blade is slid from a small radius arc to a large radius arc, the sealed working chamber gradually increases to form a local vacuum, and the oil in the tank is sucked through the oil suction chamber through the oil pan; Rotate the rotor every week, the blade in the tank to slip back and forth 2 times to complete the 2 oil and 2 times the pressure oil, and the pressure generated by the radial force is balanced, so called double acting, also known as balanced.
Single acting vane pump works: mainly by the stator, rotor, blade and oil pan and other components. The inner surface of the stator is a cylindrical shape, the rotor is eccentrically mounted in the stator, that is, an eccentric e, the blade is mounted in the rotor radial chute and slid radially within the slot. Rotor rotation, the centrifugal force and the role of the root pressure of the blade under the action of the blade close to the inner surface of the stator, so that between the two adjacent leaves to form a sealed working chamber. In one side, the blade gradually extended, sealed working chamber gradually increased, the formation of local vacuum, the formation of oil; the other hand, the other side, the formation of oil. Rotate each turn a week, the blade in the chute reciprocating slip 1 times to complete a suction oil pressure. Oil pressure generated by the radial force is not balanced, so called single acting, also known as unbalanced vane pump.
Vane Pumps
Power never sounds better than when it’s quiet—that’s why Eaton fixed displacement vane pumps with low-noise characteristics are an excellent choice for a broad range of mobile and industrial applications. Featuring modular designs for flexible displacement, mounting and port options, as well as cartridge kits engineered for easy interchangeability and repair, Eaton vane pumps excel globally in molding, material handling, construction, manufacturing and automotive industries

vane pumps YB-A16B,A25B,A36B Single stage vane pump

Model	Displacement (ml/r)	Pressure (MPa)	Flow (L/min)	Drive Power (Kw)	Weight (kg)	Speed (r/min)
YB-A16B	16	7	24	4	6	1500
YB-A25B	25	7	37.5	5.2	6	1500
YB-A36B	36	7	54	7.5	6	1500

Análisis del mantenimiento rutinario y resolución de problemas de bombas centrífugas. 1 principio de funcionamiento básico de la bomba centrífuga La bomba centrífuga se diseña de acuerdo con el principio de la fuerza centrífuga. El motor impulsor impulsa el impulsor a girar por el eje de la bomba para generar fuerza centrífuga. Bajo la...

El sello de aceite de alta presión de la bomba de émbolo de medidas de tratamiento y análisis de las causas La bomba de émbolo dentro del cárter de aceite de lubricación por salpicadura, en el cigüeñal y la cabeza de la barra de conexión con el exterior de la Caja de conexión de la instalación de sello para evitar la fuga de aceite.El esqueleto del sello por el...

Teniendo temperatura normas para motores y bombas Primero, rodamiento de cojinete de la bomba estándar temperatura estándar 1, 824.4.1 gb3215 bomba funcionando, la máxima temperatura no excede de 80 ° c. 2, jb/t5294-913.2.9.2 aumento de la temperatura de cojinetes no debe exceder la temperatura de 40,...