Welcome to my shop! Glad to serve you! Please send your question!
Price
Inspection Certificate
Product Specifications
Company Profile
Dofluid QPG-03-16/32/63 Descripción del producto
Welcome to "Saar Hydraulic", your one-stop hydraulics!
Dofluid Throttle valves QPG-03 Series
Function
Additional drain port (Pmax.≦2 bar) Separate pipe required, back to the tank
RELIEF VALVESThrottle valves QPG-03 Series
Parker pressure relief valves are designed such that when upstream pressure exceeds the closing force exerted by the spring, the lower stem opens, permitting flow through the valve.
Constant pressure overflow function: In the quantitative pump throttling system, the quantitative pump provides a constant flow. When the system pressure increases, the flow demand will be reduced. At this point the relief valve open, so that excess flow back to the tank, to ensure that the relief valve inlet pressure, the pump outlet pressure is constant (the valve port often with pressure fluctuations open).
Regulating effect: the relief valve in series on the return line, the relief valve to produce back pressure, moving parts increased stability.
System unloading effect: In the remote control port of the relief valve series of small flow of the solenoid valve, when the electromagnet power, the relief valve remote control port fuel tank, hydraulic pump unloading. The relief valve is used as an unloading valve at this time.
Safety protection: When the system is working properly, the valve closes. Only when the load exceeds the specified limit (the system pressure exceeds the set pressure) to open the overflow, overload protection, the system pressure is no longer increased (usually the relief valve set the pressure than the system maximum working pressure 10% to 20% ).
Practical applications are generally: for unloading valve, for remote pressure regulator, for high and low pressure multi-stage control valve, for the sequence of valves, used to produce back pressure (string in the oil on the road).
Relief valve generally has two kinds of structure: 1, direct-acting relief valve. 2, the pilot relief valve.
The main requirements of the relief valve: large voltage range, voltage deviation is small, the pressure vibration small, sensitive action, overload capacity, noise.
Dofluid QPG-03-16/32/63 INTERCHANGE
relief valves Part series QPG-03-16/32/63 is a potential replacement for these common bearing part numbers:
1 principio de funcionamiento básico de la bomba centrífuga La bomba centrífuga se diseña de acuerdo con el principio de la fuerza centrífuga. El motor impulsor impulsa el impulsor a girar por el eje de la bomba para generar fuerza centrífuga. Bajo la...
La bomba de émbolo dentro del cárter de aceite de lubricación por salpicadura, en el cigüeñal y la cabeza de la barra de conexión con el exterior de la Caja de conexión de la instalación de sello para evitar la fuga de aceite.El esqueleto del sello por el...
Primero, rodamiento de cojinete de la bomba estándar temperatura estándar 1, 824.4.1 gb3215 bomba funcionando, la máxima temperatura no excede de 80 ° c. 2, jb/t5294-913.2.9.2 aumento de la temperatura de cojinetes no debe exceder la temperatura de 40,...
Español
English
العربية
Deutsch
Ελληνικά
Français
Bahasa Indonesia
Italiano
日本語
Português
Русский язык
Shqip
Svenska
ไทย
Türkçe
Українська
kamenzhang2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Yuken Remote Control Relief Valves- DT-01,DG-01 Series
Yuken Pilot Operated Relief Valves - B Series
Yuken Unloading Relief Valves - BUCG Series
Modular Relief Valve MRV-03 Series
Modular Relief Valve MRV-01 Series