Inicio>Productos>Linde Hydraulic Pump>Linde CM 75R Hand Cutting Machine
Linde CM 75R Hand Cutting Machine
category
Linde Hydraulic Pump
Linde CM 75R Hand Cutting Machine SPECIFICATIONS
- Used
- Linde
- CM 75R
- kamenzhang2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Datos del producto
- Used
- Linde
- CM 75R
Descripción del producto
Powered Hand held "Oxy-Fuel" Cutter
Description:
The LINDE CM-75 :Cadet: is a portable, clutch equipped cutting machine for table cutting of steel ranging 1/8-in. sheet to 2-in. plate.
The basic machine weighs less than 19 pounds, and can be used with (1) acetylene, or (2) propane or natural gas.
It is adaptable for mechanized straight line and circle cutting, bevel cutting, and limited hand-guided shape cutting.
Controls:
The machine is equipped with the following controls:
1. On-Off Switch - A trigger-type switch located on the handle starts and stops the drive motor.
2. Clutch trigger - A spring-type switch located above the on-off switch enables you to instantaneously disengage the drive motor for maxumum control during the cutting operation.
3. Speed Control dial - An accelerator dial located on the underside of the motr housing controls machine speed.
4. Cutting oxygen Thumb Lever - A switch for opening and closing the cutting oxygen valve enables you to start and stop the cut at any point.
5. Oxygen Valve (blue know) and Fuel Gas Valves (yellow know) - Controls flow of pre-heat gases, enabling you to adjust the pre-heat flame.
6. Reversing Switch - A toggle switch located on the controls housing changes direction of movement of the machine. This is an optional feature found only on a special model.
Variable travel from .1 to 20 inches per minute
3" to 38" diameter capacity
Circle attachment not included
115VDoes not come with extra cutting tips
Here are the different Nozzle types that work with the machine:65Z85 External Acetylene Nozzle
65Z90 External Fuel Gas Nozzle
65Z80 Internal Acetylene Nozzle
65Z82 Internal Acetylene Nozzle
65Z83 Internal Acetylene Nozzle
65Z84 Internal Acetylene Nozzle
OR
65Z86 Internal Fuel Gas Nozzle
65Z87 Internal Fuel Gas Nozzle
65Z88 Internal Fuel Gas Nozzle
65Z89 Internal Fuel Gas Nozzle
Contact ESAB if you have any questions regarding new nozzles: (1-800-372-2123)
If you have any other questions please do not hesitate to message me!
Contacto
- Email[email protected]
- Dirección
- Teléfono de la empresa(Holario de trabajo)
- Fax
Linde CM 75R Hand Cutting Machine Technical Articles
Análisis del mantenimiento rutinario y resolución de problemas de bombas centrífugas. |
El sello de aceite de alta presión de la bomba de émbolo de medidas de tratamiento y análisis de las causas |
Teniendo temperatura normas para motores y bombas |
Linde Hydraulic Pump CATEGORIES
- PVT64 PUMP
- Dansion P080 pump
- Dansion P110 pump
- Dansion P140 pump
- Dansion P200 pump
- Dansion P260Q pump
- WorldcupP6W Pump
- Worldcup P7W Pump
- A10VSO (Series 32)
- (A)A4VSO (Series 10 & 30)
- A15VSO (Series 10)
- AA4VG (Series 32)
- AA10VG (Series 10)
- Hitachi Hydraulic Pump
- Eaton
- Sauer Danfoss
- vane pumps
- gear pumps
- check valves
- relief valves
- AZPF and AZPN
- AZPG
- PGH
- PVT29 PUMP
- PVT38 PUMP
- Gold cup P7R series piston pump
- rexroth pump
- rexroth linear
- rexroth valve
- pressure valves
- solenoid directional valves
- control valves
- PVV
- PV7 - Direct Operated
- Vickers vane pump
- T6CC vane pump
- PV pump
- PVT6 pump
- yuken Hydraulic Pump
- siemens
- Gold cup P7 pump
- Gold cup P8R series piston pump
- NACHI Hydraulic Pump
- Gold cup P8 pump
- PVT10 PUMP
- PVT15 PUMP
- PVT20 PUMP
- daikin Hydraulic Pump
- Worldcup P8W Pump
- Gold cup P6P series pump
- Gold cup P7P series pump
- Gold cup P8P series pump
- Gold cup P6R series piston pump
- filteration filter elements
- Vickers Hydraulic Pump
- Denison Hydraulic Pump
- Gold cup P6 pump
- Gold cup P11 pump
- Gold cup P14 pump
- Gold cup P24 pump
- Gold cup P30 pump
- parker gear pump
- Rexroth Hydraulic Pump
- Bosch Hydraulic Pump
- A10V(S)O & (A)A10VSO (Series 31)
- A1VO (Series 10)
- A10V(S)O (Series 52)
- piston pumps
- Other Pump
- Komatsu Hydraulic Pump
- Linde Hydraulic Pump
- operated directional valves
- PVT47 PUMP
- fans cooling
- piston motors
- pressure swithes
- accessories
- mitsubishi
- Sumitomo Hydraulic Internal Gear Pump
- VPV
- PSV
- A11V
- Vickers
Customers Who Viewed Linde CM 75R Hand Cutting Machine Also Viewed
- MANN Inspektionspaket VW AUDI SEAT SKODA 1.6 BGU BSE BSF CCSA CMXA CCSA CHGA
- HELLA Heckleuchte Rücklicht links, rechts
- Anlasser Starter Clark Linde Still VW Multicar M25 M26 mit VW Motor 12V
- GALET 85 105 110 20 mm TRANSPALETTE FENWICK LINDE N20L N20LI N°132 PIECES
- Glühlampe HELLA VW, FORD, OPEL, RENAULT, TOYOTA, FIAT, MERCEDES, AUDI, SKODA